School of Engineering VOL.]]]Z

 
CONTENTS
 

   
Study on Noncontact Support and Transportation of a Rectangular Thin Steel Plate  
 
Shinya HASEGAWA, Takayuki OBATA, Yasuo OSHINOYA and Kazuhisa ISHIBASHI
     
Secondary Compression of Anisotropic Consolidated Clays  
 
Fumiko KAWAURA, Akira TONOSAKI, Masaru AKAISHI and Yannis F.DAFALIAS
     
Finite-Element Simulation on Wire Breakage Induced by Eccentric Inclusion in Shaped Wire Drawing  
 
Somchai NORASETHASOPON and Kazunari YOSHIDA
     
Flutter of a Soft Plate in Channel Flow (Fundamental Study on Palatal Flutter)  
 
Takashi YUMINO, Tsuneo SAITO, Keiichi SASAKI and Yoshimichi TANIDA
     
Novel Photoinduced Alignment Material Consisting of Aromatic Polyamide for Liquid Crystal Display Device  
 
Yu NAGASE and Eiichi AKIYAMA

Abstracts of Proceeding of The School of Engineering of Tokai University 2001-2002
Recent Development of Far Infrared and Submillimeter Detectors for Astronomical and Astrophysical Observations  
 
Moriaki WAKAKI, Junichi TSUCHIYA, Osamu ABE and Hiroshi MURAKAMI
     

From Glycobiology to Glycotechnology

 
 
Yoshihisa NISHIKAWA and Tetsuo TAKAHASHI
     
Biomimetics Research on Flying Insects for Developing High Performance,Small-Sized Actuator  
 
Hiromu HASHIMOTO
     
Studies on the Tokai University System of Lean Burne Engine and a racing Car for Le Mans  
 
Yoshimasa HAYASHI and Naoto NAKAMARU
     
Collaborative Rocket Experimental Project between Tokai University andUniversity of Alaska Fairbanks  
 
Fumio TOHYAMA and Joseph G. Hawkins
     
Study on Noncontact Support and Transportation of a Thin Steel Plate  
 
Yasuo OSHINOYA and Kazuhisa ISHIBASHI
     
Study on measurements of air quality in museums  
 
Toshie IWATA, Naoko OBA and Hiroyasu TSUKAHARA
     
Electrode Materials for Lithium Ion Secondary Batteries  
 
Soichiro ISHII and Keiichi KATAYAMA
     
Study of Fluidity and Transition Phenomena of Lubricating Oils and Greases by Torsional Braid Analysis  
 
Setsuo SASANUMA
     
Ultimate Strength of Carbon Fiber Chip Reinforced Concrete Cylindrical shells with Opening under Impact Line Load  
 
Kazuhiko MASHITA, Kazuomi MINAMOTO, Takashi KUMADA and Yuko SUZUKI
     
A simple vibration control system for shear structures under free vibration  
 
Toshiki MATSUYAMA, Yuuki SAKAI and Yoji SHIMAZAKI
     
Calculation of time-dependent Bingham plastic flow using marker FEM  
 
Osamu TANAKA and Yoji SHIMAZAKI
     
A Numerical Model for Soliton Fission and Wave Breaking of Shallow Water Waves  
 
Masato FUKASAWA, Hiroyuki IWASE, Chiaki GOTO and Kunihiko IIDA
     
Effect of Dimple Number on Flying Characteristics and Flow Pattern of Golf Ball  
 
Atsuo OHIKE, Katsumi AOKI and Kiyonaga YAMAGUCHI
     
Aerodynamic Characteristics for the Design of Rubber-ball  
 
Yasuhiro KINOSHITA, Katsumi AOKI and Jiro NAGASE
     
The Characteristic of a Centrifugal Blower and the Flow Pattern for the Shape of Tongue  
 
Atsushi KOIZUMI and Katsumi AOKI
     
Free Vibration Characteristics Of Stiffened Cylindrical Shell  
 
Yosiaki YASUI, Satosi INOUE and Yasuhito NAKAKUKI
     
An Analysis of Dynamic Stability of Composite Laminated Cylindrical Shells Subjected to Periodic Axial Compressive Loading  
 
Keiichi NEMOTO, Yasuji YAMAGISHI and Hirakazu KASUYA
     
Effect of Lamination Constitution on Buckling of Composite Laminated Cylindrical Shells under Hydrostatic Pressure  
 
Yasuji YAMAGISHI, Takayuki SATOH and Hirakazu KASUYA
     
Experimental Study of the Flow Characteristics in the Groovers of Riblet  
 
Takayuki MAJIMA, Hisayuki ENNOJI and Toshio IIJIMA
     
Effect of Exciting position for Sound Field in Cylindrical Enclosure with End Plates  
 
Hiroyuki MORIYAMA
     
Study of Erosive Burning Correlation of Composite Solid Propellants Based on the Experiments with Sub-Scale Motors  
 
Hiroshi HASEGAWA, Shinichiro TOKUDOME and Masahisa HANZAWA
     
Experimental Properties of Low-Power Micro-Hall Thrusters  
 
Yasumasa ITOH and Tohru SAKURAI
     
Elastic Modulus of Cross Linked poly-Vinyl Alcohol Gel  
 
Takashi ASAKA and Hisao KIKUGAWA
     
Extinction Mechanism of Hydroxyl-Terminated Polybutadiene/Mg-Al/Ammonium Nitrate Solid Propellants  
 
Hirokazu MURATA, Yasuo AZUMA, Keiichi HORI, Takeo SAITO
     
Development of Novel Characterization Method to Evalutate Modal Birefringence and Polarization Mode Dispersion Based on Optical Frequency Domain Interferometry  
 
Masaki YAMANAKA, Moriaki WAKAKI, Koichi NISHIZAWA,
Yoshihiro OHTSUKA and Yoshinori NAMIHIRA
     
Cracking Pattern of Concrete Cylindrical Shells under Impact Load  
 
Kazuhiko MASHITA, Yoshinori SATO, Yuko SUZUKI
     
Ultimate Strength of Carbon Fiber Chip Reinforced Concrete Hemispherical shells with Circular Openings  
 
Kazuhiko MASHITA, Yasuhiro YAGANE and Takashi KUMADA
     
Study on Strength Evaluation of Concrete Cylindrical Shells Based on Stability Analysis  
 
Kazuhiko MASHITA and Hiroyuki HAYAKAWA
     
Optimum Parameters for a tuned Rotary-Mass Damper  
 
Tomoyuki SAKUMA, Yoji SHIMAZAKI
     
A Numerical Model for Prompt Prediction of Flood-Inundation Flows Using Topography-Fitted Grid  
 
Hiroyasu YASUDA, Chiaki GOTO, and Kunihiko IIDA
     
Developmennt of Support System of Levee Protection Activities Based on GIS and Prompt flood-prediction Model  
 
Hiroyasu YASUDA, Chiaki GOTO and Kunihiko IIDA
     
Research on Pressure Fluctuation Reduction Mechanism of Spiral Hose for Automobiles  
 
Hirohiko OGINO, Akira OHNUKI and Yasuhiro SATHO
     
Peformance of Straight-Through-Type Labyrinth for a Low-Pressure Axial Flow Fan with Outer Ring  
 
Kota SHIMADA, Kazuhide KIMURA, Hiroaki OHTA, Katsumi AOKI
     
Study on Diminishing the Corner Dullness of Machined Hole by EDM Using Assisting Plate  
 
Masakazu KAGAWA
     
Dynamic Stability Analysis of Angle-Ply Laminated Cylindrical Shells Subjected to Radial Impact External Pressure  
 
Yasuji YAMAGISHI and Hiralkazu KASUYA
     
Study on Impact Absorption Characteristics of Aluminum Honeycomb Cell  
 
Yoshiaki YASUI, Shinichi WADA, Tsugutomo OKUNO and Daigoro SAITO
     
Numerical Analysis of an Axisymmetric Turbulent Jet Impinging Normally on Flat Plate  
 
Atsushi ONUMA, Hisayuki ENNOJI and Toshio IIJIMA
     
Qualitative Observation of Downburst in Laboratory Experiment  
 
Satoko MIYAKOSHI, Shizuka MINAMI and Osamu KONAYASHI
     
The Effect of Formalin Preservation on Bending Properties of Bovine Compact Bone  
 
Hisao KIKUGAWA, Takashi ASAKA and Yoshiaki YASUI
     
Strain Rate Effect of Overconsolidated Clays  
 
Mitsuru KONDO, Motohiro SUGIYAMA, Akira TONOSAKI, Masaru AKAISHI
     
Influence of the Duration of Incremental Pressure on One-Dimensional Consolidation Characteristics of Clays  
 
Hiroaki SHIRAKO, Motohiro SUGIYAMA, and Masaru AKAISHI